IoT aquaculture platform
FROM WATER DATA
TO SMARTER ACTION.
Monitor your farm's water conditions in real time, understand what is happening, and respond faster with connected aquaculture technology.
GanSystems Dashboard
Live27.4°C
7.1
82%
ON
Site
Pond / farm
Where water conditions actually change
Hardware
Sensors
Water quality and level readings in the pond
Connectivity
Live telemetry
ESP32 controllers stream readings off the farm
Software
GanSystems dashboard
One view of current pond conditions
Logic
Intelligent decision
Readings evaluated against defined conditions
Actuation
Automated water control
Drain and refill actions sent back to the pond
- Field hardware
- ESP32 controllers, sensors, actuators
- Transport
- MQTT broker to the cloud platform
- Real time
- WebSocket streaming to the dashboard
- Automation
- Drain and refill on defined conditions
The problem
Water conditions move faster than manual monitoring
For fish farmers, delayed visibility can affect water quality, operational efficiency, and the health of their stock. GanSystems is designed around this practical problem.
Delayed water-quality visibility
Water conditions can change quickly, but a farm often only learns about it after the fact.
Manual monitoring
Checks depend on someone being present, with readings recorded by hand and easily missed.
Slow corrective action
Draining, refilling, and other responses wait on human availability rather than conditions.
Operational inefficiency
Time goes into routine supervision instead of the decisions that actually improve the farm.
Inside the product
The platform, screen by screen
Dashboard, telemetry, controllers, and system architecture, captured from the working GanSystems prototype.
Control Hub
Farm overview in one screen
Controller status, alerts, and water indicators grouped so an operator can read the farm at a glance.
What this screen shows
- Overview, Controllers, and Settings navigation, with the active farm and location in the sidebar
- Summary tiles for controllers, alerts, tank average, and soil average
- ESP32 fleet and open-alerts panels, shown here in a demo account with nothing registered yet
Capabilities
What the platform does
Four capabilities that make up GanSystems, and what each one relies on.
Water-Quality Monitoring
Track critical aquaculture conditions, device health, and pond activity from a single live view.
Connected sensors report water conditions continuously, so operators stay informed without constant manual reporting or spot checks.
In practice — One place to see how every pond is doing right now.
Automated Water Control
Support draining and refilling actions when predefined water conditions require intervention.
ESP32-based field controllers can act on predefined conditions, so routine water changes happen when the data says they should.
In practice — Corrective action does not have to wait for someone on site.
Intelligent Analysis
Turn telemetry into clearer signals that help farmers respond before conditions become critical.
Readings are processed into trends and states that a farm team can act on, instead of a stream of values to interpret by hand.
In practice — Fewer raw numbers, clearer decisions.
Live Telemetry
Collect sensor updates in real time and turn them into useful operational insight.
Devices publish telemetry to the cloud platform, which streams updates to the dashboard for monitoring, review, and reporting.
In practice — Field conditions reach the dashboard as they change.
How it works
From a single reading to a corrective action
Five stages take pond conditions from a sensor in the water to an action back at the pond.
- 01
Sense
In the pond
Sensors collect important pond and water-condition data.
- 02
Connect
ESP32 controllers
Devices transmit telemetry to the GanSystems platform.
- 03
Monitor
Dashboard
Operators see current conditions and device information through the dashboard.
- 04
Analyze
Platform
GanSystems turns raw telemetry into clearer operational signals.
- 05
Act
Back at the pond
Farmers or connected controllers can respond to changing conditions, including supported drain and refill automation.
The ecosystem
One connected system for the modern fish farm.
Equipment in the water, the data it sends, the platform that reads it, and the action that follows.
Physical farm
The pond and the equipment around it.
- Pond / tankWhere the fish are
- PumpsMove water in and out
- SensorsRead water conditions
- ControllersESP32 units in the field
Data
What the farm sends back, continuously.
- Water readingsConditions in the pond
- Device statusWhether equipment is reporting
- TelemetryReadings streamed off the farm
Platform
Where the farm becomes something you can read.
- DashboardOne view of every pond
- MonitoringCurrent conditions and devices
- AnalyticsReadings turned into signals
Action
What the farm does about it.
- AlertsAttention where it is needed
- Operational decisionsPeople act on what they see
- Supported automated controlsDrain and refill on defined conditions
Why GanSystems
Built around how fish farms actually run
Five principles behind the hardware, the telemetry, and the dashboard.
- 01
Practical Technology
Technology designed around real farm operations.
- 02
Real-Time Visibility
Know what is happening in connected farm environments.
- 03
Connected Infrastructure
Link physical equipment, sensors, telemetry and software.
- 04
Actionable Data
Turn measurements into operational information.
- 05
Built for Local Conditions
Focus on practical deployment and scalable aquaculture technology for Nigeria and beyond.
- WinnersAfrica Innovation Challenge 2023
- Top 5 in North CentralNigerian Engineering Olympiad 2026Selected from 400+ applicants
The team
Three people building the infrastructure behind GanSystems
Maxwell
CEO
Valentine
CTO
Majid
COO
Nyam
CMO
See what GanSystems can do for your farm
Explore the platform, connected hardware, and monitoring technology behind our smart-aquaculture system.
Or email the founders directly at mvmholdco@gmail.com